Material comparison
2026 Ford F-150 wrap calculator material comparison
Compare the same 126.0 sq ft full-wrap baseline across your main film families before ordering.
Open calculator
Compare vehiclesBody film comparison table
Ford F-150 wrap material comparison table.
| Material profile | Best use | Roll width | Recommended length | Waste range | Risk notes |
|---|---|---|---|---|---|
| 60 in cast color-change film Use as the normal planning profile for gloss, satin, matte, and most non-directional color-change films. | Default baseline for full exterior color-change wraps on simple and moderately complex vehicles. | 60.00 in | 37.7 ft | 10-15% | Standard full-wrap planning. |
| 1.52 m premium cast wrap film Use when the roll is sold as 1520 mm material; output will be close to a 60 in roll but not identical. | Metric-width premium cast planning for shops buying 1.52 m European or international roll stock. | 59.84 in | 37.8 ft | 10-16% | Standard full-wrap planning. |
| 60 in high-conformability cast film Keep extra allowance for complex panels even when the final roll width matches standard cast film. | Deep bumpers, mirrors, channels, recesses, and compound curves where repositioning matters. | 60.00 in | 37.7 ft | 12-18% | Standard full-wrap planning. |
| 54 in printable cast wrap film Plan for compatible overlaminate, print alignment, panel registration, and extra trimming beyond plain color-change film. | Fleet graphics, commercial wraps, and printed vehicle graphics that will be laminated before installation. | 54.00 in | 41.9 ft | 15-22% | 54 in printable cast wrap film may need more panel planning on wide body sections. 54 in printable cast wrap film usually needs compatible overlaminate, print alignment, and panel registration planning. |
| 60 in metallic cast wrap film Keep panel direction consistent and avoid mixing batches on visible adjacent panels. | Metallic and pearlescent cast wraps where roll direction and batch consistency affect the final look. | 60.00 in | 37.7 ft | 14-20% | 60 in metallic cast wrap film may need more panel planning on wide body sections. 60 in metallic cast wrap film is a specialty profile; add installer planning before cutting film. |
| 60 in color-shift specialty film Order enough material from one batch and plan the vehicle by film direction before cutting large panels. | Chameleon, flip, iridescent, or color-shift finishes that need consistent panel orientation. | 60.00 in | 37.7 ft | 18-26% | Waste allowance is below the 18-26% range recommended for 60 in color-shift specialty film. 60 in color-shift specialty film is a specialty profile; add installer planning before cutting film. |
| 60 in textured specialty film Keep texture grain consistent across panels and avoid over-stretching pattern-heavy areas. | Carbon fiber, brushed metal, and other visible texture patterns where alignment is more important than shortest length. | 60.00 in | 37.7 ft | 18-28% | Waste allowance is below the 18-28% range recommended for 60 in textured specialty film. 60 in textured specialty film is a specialty profile; add installer planning before cutting film. 60 in textured specialty film has specialist stretch handling requirements. |
| 48 in chrome specialty film Chrome-style films are less forgiving; confirm the product is approved for the exact panel scope before ordering. | Partial chrome accents and specialty panels where the film supplier limits full-wrap use. | 48.00 in | 47.1 ft | 25-35% | Waste allowance is below the 25-35% range recommended for 48 in chrome specialty film. 48 in chrome specialty film is a specialty profile; add installer planning before cutting film. 48 in chrome specialty film has specialist stretch handling requirements. |
| 60 in gloss paint protection film Use PPF as a separate planning case; wet application, slip solution, and pattern layout are not the same as vinyl wrap. | Clear paint protection film planning where wet installation and pattern strategy differ from color-change vinyl. | 60.00 in | 37.7 ft | 18-28% | Waste allowance is below the 18-28% range recommended for 60 in gloss paint protection film. 60 in gloss paint protection film may need more panel planning on wide body sections. 60 in gloss paint protection film uses wet installation and should be planned separately from color-change vinyl. 60 in gloss paint protection film has specialist stretch handling requirements. |
| 60 in retail cast wrap film Use this as a market availability check, then confirm the final product data sheet before cutting. | Retail-available cast wrap film planning when the exact manufacturer series will be confirmed during ordering. | 60.00 in | 37.7 ft | 12-18% | Standard full-wrap planning. |
Main recommendation
60 in cast color-change film
Default baseline for full exterior color-change wraps on simple and moderately complex vehicles.
Baseline area126.0 sq ft
Recommended length37.7 ft
Waste range10-15%
Glass film add-on card
Keep glass film as a separate planning line item.
Body wrap area does not translate to tint square footage. Scope side glass, back glass, windshield policy, and heat-rejection target separately from body film length.
Separate scopeWindow tint
Do not combine withBody wrap length
Recommended workflowSeparate add-on scope
Specialty film note
60 in metallic cast wrap film needs orientation planning before cutting.
Metallic and pearlescent cast wraps where roll direction and batch consistency affect the final look.
60 in metallic cast wrap film may need more panel planning on wide body sections. 60 in metallic cast wrap film is a specialty profile; add installer planning before cutting film.
Next action
Back to vehicle page